full arc type five-roller continuous straightening CCM

Description:

we are the professional manufacturer to designed the continuouscasting machine according to the customer''s requirement

1,           strip plate mould of the entirety copper-tube mode which is simpleand low cost.

2,           High-frequency and small-swing plate spring vibration, the depth ofvibration mark is under  0.2mm

3,           The simplified billet guiding device is low cost and easymaintenance.

4,           Five-roller and four-drive straightening machine is of the largestraightening power.

5,           Auxiliary straightening machine can re-straighten the billet inemergency.

6,           Stainless steel cutting machine can cut-to-length accurately.

7,           The coping rate in the surface is less than 5%

 

Technology parameter

mode	full arc type five-roller continuous straightening CCM forsquare billet and rectangular bloom
Strand quantity	1, 2, 3, 4
radius	5.25, 6, 8, 9, 10, 12m
Billet specification	Square billet  150×150, 180×180, 200×200, 240×240mm Rectangular billet (120~200)×(240~600)
Drawing speed	0.6~1.2 m/min
Annual output	100000~150000/strand
Overflow rate	≤0.1%
Continuous casting time	≥8h

full arc type five-roller continuous straightening CCM